Installation of the pushbutton

Do not disconnect the connector from the cable.

The pushbutton must be installed.

The pushbutton includes a temperature sensor. Make sure that the air can flow around the pushbutton at the installation location, but the pushbutton must be shielded from direct air flow from ventilation ducts.

The pushbutton must be located within the driver's field of view and operation.

The pushbutton has four functions:

  1. Switch the heater on/off.
  2. Acknowledge new users.
  3. Measure the temperature.
  4. Reset or restart, see Restart/Settings reset.
  1. Plug on the ThermoConnect TCon2 wiring harness.
  2. Install the pushbutton at an accessible location, a protected area.