Pushbutton
The pushbutton must be located within the driver's field of view and operation. Install the pushbutton at an accessible location, a protected area.
The pushbutton switches the air- or water heater on or off with a default duration.
- Press the pushbutton to start the air- or water heater.
If necessary, the default duration can be changed. See My WebastoConnect web service.
The illumination of the pushbutton is also a status indicator:
- LED does not light up - The heater is switched off.
- LED flashes green – The heater is not connected, searching for the cellular network or restart in progress.
- LED lights up green - Heater is on.
Use of the pushbutton to restart and reset the ThermoConnect TCon2 receiver.
- Restart see Restart.
- Reset see Settings reset.
Restart
- Press and hold the pushbutton for 10 s.
- Release the pushbutton.
- The ThermoConnect TCon2 restarts.
- The pushbutton illumination flashes while the ThermoConnect TCon2 is restarting.
Settings reset
Settings reset performs the following functions:
Connection settings revert back to default. Removes paired mobile users and user phone numbers. Removes all timers and location-based events.
Procedure for resetting to factory settings:
- Press and hold the pushbutton for 10 s.
- Release the pushbutton.
- Press the pushbutton 3 times while the pushbutton LED is flashing.